Product Details
The Mini-Check©
Building on the huge success of the original award winning Cell Checker©, Narked at 90 are delighted to offer a small, lightweight and low cost alternative for the rebreather diver. The Mini-Check© plugs into your existing rebreather electronics to display the cells output.
All the necessary controls are built in to its small housing.
Current limitation's and non linearity of Galvanic oxygen cells has been a problem for rebreathers from the start and has caused a number of accidents. This fact has pushed myself and my colleagues to try and minimise the problems encountered on dives with current limited cells.
Calibration on the surface can only produce an output from the cells for 1 bar PPO2. Diving at a set point greater that 1.0 will put you at risk of Hyperoxia unless you can verify the cells integrity. Usually this involves an Oxygen flush at 6m depth and watching the cells are not current limited.
Doing this after a dive or whilst doing deco is too late and can be tricky at the beginning of a dive if the current is flowing or you're pressured into a fast descent. 6M flushes are inaccurate and will not tell you if your cells are linear or capable of maintaining their output over a period of time with out dropping off. So now you can check your cells for current limiting before you get in the water. We firmly believe it will save lives or at the very least save your dives or dive trips.
ONLY ONE HEAD AND CABLE TYPE COMES WITH THE MINI-CHECK© YOU CHOOSE WHICH ONE. 
(MOLEX)
Fits Inspiration classic(older version)
Kiss classic and Sport Kiss
Megladon
rEvo
Optima
submatics
Nautilus
Poseidon
Titan
Palagian
(JACK)
Ouroborous
(SMB coax)
Deep Pursuit
APD Vision and Evolution and newer Inspirations
Cameleon 
FEATURES
Interchangeable heads with different cell connections
Controlled safe oxygen injection
Controlled safe oxygen pressure release
Built in over pressure safety's
All gold cell connectors (molex, jack, coaxial-SMB)
PC software included
Power point presentation included
Full colour manual
Comprehensive look up table sets
also available with a cable for use with a Volt meter
or a Fischer cable so you can plug in a shearwater or Luiqivison x1
HOW TO ORDER THE MINI-CHECK©
Choose which cell connector head you would like and select it from the drop down menu,
then select the cable type you would like.
if you have a molex type cell you would want a molex cable if you are going to plug the mini check into your rebreather the same goes for SMB and JACK, if you want to plug into a volt meter or a Shearwater choose the cell type then choose either the voltmeter or fischer cable type.
DO NOT FORGET TO ADD THE CORRECT SHIPPING OPTION
